Reply to thread

Help Support Ford Focus Electric Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

Remove the dummy chrome piece that is stuck in the H1 bulb position:

The next step is a long one. Cut the wire to the H1 socket. It also goes to a control mod and you do not want that connected. Add a ground wire (I soldered on around the H1 bulb base plate). Drill a hole through one of the unused connector holes - you can see the one I used. The plastic is VERY thin so go easy as you're through very quick. Feed two wires through and I added a waterproof connector. Seal the hole against moisture. This the hard step so it'll take a while. Here's all that done:

Don't forget to install the H1 LED bulb. Mine has 8 LEDs but I have a better COB bulb ordered. The slot for the H1 bulb is very thin so most bulb will not fit - it has to be thin.

You are now ready to put the headlight module back on the car.

<blockquote data-quote="SteveP" data-source="post: 27901" data-attributes="member: 5767">Remove the dummy chrome piece that is stuck in the H1 bulb position:<a href="https://postimg.org/image/a96jqrt2x/" target="_blank"><img src="https://s20.postimg.org/a96jqrt2x/P9142182.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>The next step is a long one.&nbsp; Cut the wire to the H1 socket.&nbsp; It also goes to a control mod and you do not want that connected.&nbsp; Add a ground wire (I soldered on around the H1 bulb base plate).&nbsp; Drill a hole through one of the unused connector holes - you can see the one I used.&nbsp; The plastic is VERY thin so go easy as you&#039;re through very quick.&nbsp; Feed two wires through and I added a waterproof connector.&nbsp; Seal the hole against moisture.&nbsp; This the hard step so it&#039;ll take a while.&nbsp; Here&#039;s all that done:<a href="https://postimg.org/image/pjb0bpdyx/" target="_blank"><img src="https://s20.postimg.org/pjb0bpdyx/P9142184.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>Don&#039;t forget to install the H1 LED bulb.&nbsp; Mine has 8 LEDs but I have a better COB bulb ordered.&nbsp; The slot for the H1 bulb is very thin so most bulb will not fit - it has to be thin.<a href="https://postimg.org/image/b57mjys55/" target="_blank"><img src="https://s20.postimg.org/b57mjys55/P9142185.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a>You are now ready to put the headlight module back on the car.</blockquote>

[QUOTE="SteveP, post: 27901, member: 5767"] Remove the dummy chrome piece that is stuck in the H1 bulb position: [url=https://postimg.org/image/a96jqrt2x/][img]https://s20.postimg.org/a96jqrt2x/P9142182.jpg[/img][/url] The next step is a long one. Cut the wire to the H1 socket. It also goes to a control mod and you do not want that connected. Add a ground wire (I soldered on around the H1 bulb base plate). Drill a hole through one of the unused connector holes - you can see the one I used. The plastic is VERY thin so go easy as you're through very quick. Feed two wires through and I added a waterproof connector. Seal the hole against moisture. This the hard step so it'll take a while. Here's all that done: [url=https://postimg.org/image/pjb0bpdyx/][img]https://s20.postimg.org/pjb0bpdyx/P9142184.jpg[/img][/url] Don't forget to install the H1 LED bulb. Mine has 8 LEDs but I have a better COB bulb ordered. The slot for the H1 bulb is very thin so most bulb will not fit - it has to be thin. [url=https://postimg.org/image/b57mjys55/][img]https://s20.postimg.org/b57mjys55/P9142185.jpg[/img][/url] You are now ready to put the headlight module back on the car. [/QUOTE]

Verification