Charge port light flashing / not charging

[gilmore950]

Hi everyone, I was wondering if anyone has any advice on this issue.
The car stopped charging a few days ago. The charge port light flashes a few times and then goes out.
I picked up a forscan compatible USB adapter and read to pull the codes but I'm not sure how to interpret it all and if there is anything I'm able to do.

I'll attach the log files.
Any help would be greatly appreciated.

 

[Anti_Climax]

These are the ones for the charge port:
===GFM DTC B1464:00-0A===
Code: B1464 - Charge Port Light Ring LED Segment 4

Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC

Module: Generic Function Module

===END GFM DTC B1464:00-0A===

===GFM DTC U019B:00-08===
Code: U019B - Lost Communication With Battery Charger Control Module 'A'

Status (-08):
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC

Module: Generic Function Module

===END GFM DTC U019B:00-08===

I'd recommend clearing all the faults, trying to charge again and then pulling codes. There's a lot of stuff that triggered at some time in the past but not currently active.

I will say that the behavior you're describing is similar to what I saw when one of the inline fuses on my charge port was open circuit.