3D printable models for some common Ford interior trim pieces

[spirilis]

I got a 3D printer last month and have gone nuts with the hobby. Turns out some folks have produced 3D models of a few common interior trim pieces our Focus Electrics use.

1. The peg for hanging the rear parcel cover - DV6Z58519A16AA

https://www.thingiverse.com/thing:1686200/files
Printed with PETG (doesn't warp under 185F/85C)

2. The 2-piece clip that rests the parcel cover at the studs in the back near the rear seats - Can't find a ford P/N for the clip separate from the shelf. It's part of DV6Z5846668BA

Printables - my remix which pulls the slots in 1.2mm total which fits my 2017 Focus's shelf better - this model requires drilling some holes and adding M3x14mm screws & nuts to keep it intact (vs. the old one which used some spring clips). Probably more reliable that way.

3. The clips that hold the carpet piece under the glove box** - W710210S300

https://www.thingiverse.com/thing:5265463
** also useful with my C-Max

 

[Anti_Climax]

Hopefully Ford is more tolerant than Honda. https://www.thedrive.com/news/honda...ted-3d-printing-models-from-maker-communities

 

[Jbodor]

I also got a 3D printer over the holidays and have been doing some research and wondering about doing some aero mods for my 2017 FFE we also have a C-Max Energi and got some mods that has helped with efficiency.

One of my first projects I was thinking of starting is an insert clip for the spokes of the wheel that may reduce turbulence and drag. But making them in black to preserve the appearance of a spoked wheel.